Equator 2WD V6-4.0L (2009)
Powertrain Management > Fuel Delivery and Air Induction > Fuel Rail > Component Information > Service and Repair > Exploded View > Page 2107
Tool number : -(J-45488)
c. Insert Tool into quick connector until sleeve contacts and goes no further. Hold the Tool on that position.
CAUTION: Inserting the Tool hard will not disconnect quick connector. Hold Tool where it contacts and goes no further.
d. Pull the quick connector straight out from the fuel tube.
Pull quick connector holding it at the (A) position, as shown.
Do not pull with lateral force applied. O-ring inside quick connector may be damaged.
Prepare container and cloth beforehand as fuel will leak out.
Avoid fire and sparks.
Do not expose parts to battery electrolyte or other acids.
Do not bend or twist connection between quick connector and fuel feed hose during removal and installation.
Be sure to cover openings of disconnected pipes with plug or plastic bag to avoid fuel leakage and entry of foreign materials.
|[PREV PAGE] [NEXT PAGE]|