Equator 2WD V6-4.0L (2009)
Sensors and Switches > Sensors and Switches - Windows and Glass > Power Window Switch > Component Information > Service and Repair > Front Power Window Switch: Removal and Installation > Page 552
Power Window Switch: Service and Repair
Power Window Main Switch: Removal And Installation
1. Remove the power window main switch finisher (2) from the front door finisher LH. Refer to [Door Finisher: Removal and Installation].
2. Remove the three screws (A) from the power window main switch (1), then separate from the finisher (2).
Installation is in the reverse order of removal.
|[PREV PAGE] [NEXT PAGE]|