Equator 2WD V6-4.0L (2009)
Sensors and Switches > Sensors and Switches - Windows and Glass > Power Window Switch > Component Information > Service and Repair > Front Power Window Switch: Removal and Installation > Page 553
Power Window Switch: Service and Repair
Rear Power Window Switch: Removal And Installation - Rear Door Switch (if Equipped)
1. Remove the rear power window switch finisher (2. from the rear door finisher. Refer to [Door Finisher: Removal and Installation].
2. Release the two tabs (A), one on either side, then separate the rear power window switch (1. from the finisher (2).
Installation is in the reverse order of removal.
|[PREV PAGE] [NEXT PAGE]|