Equator 2WD V6-4.0L (2009)
Steering and Suspension > Suspension > Control Arm > Component Information > Service and Repair > Upper Link: Removal and Installation > Page 3892
7) Remove the jounce bumper from the lower link.
INSPECTION AFTER REMOVAL
Check for deformation and cracks. Replace if necessary.
Lower Link Bushing
Check for distortion and damage. Replace if necessary.
Installation is in the reverse order of removal.
Tighten all nuts and bolts to specification.
When installing wheel and tire, refer to [Wheel and Tire Assembly: Rotation].
After installation, check that the front wheel alignment is within specification.
|[PREV PAGE] [NEXT PAGE]|