Equator 2WD V6-4.0L (2009)
Transmission and Drivetrain > Differential Assembly > Differential Cover > Component Information > Service and Repair > Rear Differential (C200 Type) > Page 2525
Differential Cover: Service and Repair
Carrier Cover: Removal and Installation
1) Drain the differential gear oil.
3) Remove the carrier cover bolts and separate the carrier cover from the gear carrier using Tool.
Tool number: KV10111100 (J-37228)
Do not damage the mating surface.
Do not insert flat-bladed screwdriver, this will damage the mating surface.
1) Apply a bead of sealant to the mating surface of the carrier cover as shown.
|[PREV PAGE] [NEXT PAGE]|