Equator 2WD V6-4.0L (2009)
Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Removal and Replacement > Page 2781
While holding the flange yoke on one side, check axial play of the joint as shown. If the journal axial play exceeds the specification, repair or
Check the propeller shaft tube for dents or cracks. If damage is detected, replace the propeller shaft assembly.
Installation is in the reverse order of removal.
After installation, check for vibration by driving the vehicle.
If propeller shaft assembly or final drive assembly has been replaced, connect them as follows:
|[PREV PAGE] [NEXT PAGE]|