Equator 2WD V6-4.0L (2009)
^
Face companion flange mark (A) of the final drive (1) upward. With the mark (A) faced upward, couple the propeller shaft and the final drive
so that the matching mark (B) of the propeller shaft (2) can be positioned as closest as possible with the matching mark (C) of the final drive
companion flange.
^
Tight propeller shaft and final drive bolts and nuts to specifications.
CAUTION:
Do not reuse the bolts and nuts. Always install new ones.
3S1310 Type
Rear Propeller Shaft: Removal and Installation
COMPONENTS
Model 3S1310