Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Removal and Replacement > Page 2791

Page 16
background image

Propeller shaft runout limit
2WD: 0.6 mm (0.024 in) or less

^

While holding the flange yoke on one side, check axial play of the joint as shown. If the journal axial play exceeds the specification, repair or
replace the journal parts.

Journal axial play: 0.02 mm (0.0008 in) or less

^

Check the propeller shaft for dents or cracks. If damage is detected, replace the propeller shaft assembly.

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Removal and Replacement > Page 2791

[PREV PAGE] [NEXT PAGE]