Equator 2WD V6-4.0L (2009)
Transmission and Drivetrain > Drive Axles, Bearings and Joints > Axle Bearing > Component Information > Service and Repair > Rear (C200 Type) > Page 2684
Always replace the axle bearing with a new one.
5) Install the back plate and torque member, new axle bearing and new bearing ring retainer on the axle shaft using a suitable press.
Maximum press load "P1" :98 kN (10 ton, 11.0 US ton, 9.8 Imp ton)
|[PREV PAGE] [NEXT PAGE]|