Equator 4WD V6-4.0L (2010)
Tool number B: ST3127S000 (J-25765-A)
Total preload torque: Refer to [Service Data and Specifications].
^
The total preload torque should be within the total preload torque specification. When not replacing the collapsible spacer, it should also be
equal to the measurement taken during removal plus an additional 0.56 Nm (0.06 Kg-m, 5 in-lb).
^
If the total preload torque is low, tighten the drive pinion lock nut in 6.8 Nm (0.69 Kg-m, 5 ft-lb) increments until the total preload torque is