Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
Electronic Brake Control Module: Service and Repair
CAUTION: As ABS control module consists of precision parts, be careful not to expose it to excessive shock.
NOTE: When connectors are connected to ABS control module, do not disconnect connectors of hydraulic unit, sensors, relay, fuse etc. and turn
ignition switch ON. Then DTC will be set in ABS control module.
REMOVAL
1) Disconnect negative cable from battery.
2) Remove steering column hole cover, knee bolster panel from instrument panel.
3) Remove release lever with latch release cable.
4) Remove junction box.
5) Disconnect ABS control module connectors.
6) Remove two bolts and take out ABS control module.
INSTALLATION
Install it by reversing removal procedure.
