suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Cancel Conditions|Page 3857 > < Clutch Switch, Cruise Control|Testing and Inspection|Page 3852
Page 1
background image

Cruise Control Switch: Testing and Inspection
Cancel Conditions

CANCEL CONDITIONS 

Constant cruising is cancelled under the following conditions.

1. Ignition switch is turned OFF 
2. Cruise main switch is turned OFF 
3. Vehicle speed has slowed down to lower than minimum operating speed (40 km/h (25 mile/h)). 
4. Vehicle speed varies beyond cancel speed range (-15 km/h, -9 mile/h) from preset speed.
5. Brake pedal is depressed. (Stop lamp switch is turned ON).
6. Clutch pedal is depressed (Clutch pedal position switch is turned ON) (For M/T vehicle).
7. Selector lever is shifted to N range (Park/Neutral position switch in transmission range switch is turned ON).
7. CANCEL switch is turned ON. 

NOTE:  When constant cruising is cancelled under any condition among above 5. to 7., vehicle speed before cancellation can be resumed by
operating ACCEL RESUME switch, provided that vehicle speed is higher than 40 km/h (25 miles/h). 

Cancel Conditions|Page 3857 > < Clutch Switch, Cruise Control|Testing and Inspection|Page 3852