Esteem GLX Wagon Plus L4-1.8L (1999)
Cruise Control Switch: Testing and Inspection
Coast/Set, Resume/Accel and Cancel Switches
These switches are built in the combination switch assembly.
CAUTION: Never disassemble combination switch will spoil its original functions.
INSPECTION
1. Disable air bag system.
2. Disconnect connector of COAST/SET, RESUME/ACCEL and CANCEL switches.
3. Check for resistance between "Gr" and "R" wire terminals of disconnected switch connector under each condition below.
All switches released (OFF) : Infinity
CANCEL switch pressed (ON) : About 0 ohm
COAST/SET switch rotated (ON) : 200 - 240 ohm
RESUME/ACCEL switch rotated (ON) : 820 - 1000 ohm
If check result is not satisfactory, replace combination switch assembly.
