Esteem GLX Wagon Plus L4-1.8L (1999)
Shift Interlock Cable: Service and Repair
INTERLOCK CABLE
NOTE: Don't bend interlock cable excessively when removing and installing it, or system will not operate correctly.
REMOVAL
1. Disconnect negative cable at battery and disable air bag system, referring to Air Bags and Seat Belts.
2. Remove steering column hole cover and steering joint cover.
3. Disconnect steering shaft upper joint bolt and steering column mounting bolts and nuts.
CAUTION: Steering column mounting bolts and/or nuts should not be loosened with steering shaft joint upper aide tightened as this could cause
damage to shaft joint bearing.
4. Remove steering upper cover.
5. Remove interlock cable clamp screw located at ignition switch and disconnect interlock cable from release shaft with ignition switch turned at
"ACC" position. And then turn ignition switch to "LOCK" position.
6. Remove parking brake cover and console box.
7. Remove cable bracket nut and detach cable end from key release cam while pressing claws of release cam boss. At this time, be careful not to
cause damage to its claws.
8. Remove interlock cable.
INSTALLATION