Grand Vitara 2WD V6-2.7L (2006)
Connecting Rods
^
Big-end side clearance:
Check big-end of connecting rod for side clearance, with rod fitted and connected to its crank pin in the normal manner. If measured clearance is
found to exceed its limit, replace connecting rod.
Big-end side clearance
Standard: 0.25 - 0.35 mm (0.0099 - 0.0137 inch)
Limit: 0.45 mm (0.0177 inch)
^
Connecting rod alignment:
Mount connecting rod on aligner to check it for bow and twist. If limit is exceeded, replace it.
Connecting rod alignment
Limit on bow: 0.05 mm (0.0020 inch)
Limit on twist: 0.10 mm (0.0039 inch)
