Grand Vitara 2WD V6-2.7L (2006)
a. Unlock button (6).
b. With lock button unlocked, disconnect connector
NOTE: With A/B fuse removed and ignition switch ON, AIR BAG warning lamp will be ON. This is normal operation and does not indicate
air bag system malfunction.
Enabling Air Bag System
Enabling Air Bag System
1. Confirm that battery negative (-) cable is disconnected.
2. Turn ignition switch to "LOCK" position and remove key.
3. Connect yellow connector (1) of contact coil and combination switch assembly by pushing connector till click is heard from it.
4. Connect yellow connector (1) of passenger air bag (inflator) module by pushing connector till click is heard from it.
5. Install glove box.
6. If equipped with side-air bag (inflator) module, connect yellow connector (1) of side-air bag (inflator) module by pushing connector till click is
heard from it.
