Grand Vitara 2WD V6-2.7L (2006)
6. Install stator (2) to rear housing by aligning match marks provided before removal and then tighten screw (1).
7. If rear end bearing (2) is removed, install it by using hydraulic press (1).
8. If drive end bearing is removed, install it.
a. Press-fit drive end bearing by using hydraulic press (1) and special tool.
Special Tool
(A):09913-76010
b. Install retainer and then tighten retainer screw (1).
9. Insert stator to front housing and install pulley and pulley nut.