Grand Vitara 2WD V6-2.7L (2006)
6. Install wheel and lower vehicle.
7. Tighten wheel nuts to specified torque.
Tightening torque
Wheel nut: 100 Nm (10.0 kg-m, 72.5 ft. lbs.)
8. Tighten suspension control arm nuts to specified torque with vehicle weight on suspension.
CAUTION: It is the most desirable to have vehicle off hoist and in non-loaded condition when tightening them.
Tightening torque
Suspension control arm nut: 135 Nm (13.5 kg-m, 98.0 ft. lbs.)
Suspension Control Arm / Bushing Disassembly and Assembly
Suspension Control Arm / Bushing Disassembly and Assembly
Disassembly
1. Remove rubber stopper (1).
2. Cut rubber (2) of flange of suspension control arm front bushing.
3. Using grinder (3), grind off flange (4) of front bushing.
CAUTION: Be careful not to damage suspension control arm (5) when grinding flange (4) of front bushing with grinder.
