Grand Vitara 4WD L4-2.4L (2009)
Brake Master Cylinder: Service and Repair
Master Cylinder Assembly
Master Cylinder Assembly Removal and Installation
CAUTION:
^
Never disassemble master cylinder. Disassembly will spoil its original function. If faulty condition is found, replace it with new one as
an assembly.
^
Do not allow brake fluid to get on painted surfaces. Painted surfaces will be damaged by brake fluid, flush it with water immediately
if any fluid is spilled.
Removal
1) Disconnect reservoir lead wire at coupler (1).
2) Clean outside of master cylinder and take out fluid with syringe or such.
3) Disconnect clutch reservoir hose (1) from reservoir (2) (M/T model).
