Grand Vitara 4WD L4-2.4L (2009)
Parking Brake Cable: Service and Repair
Parking Brake Cable Removal and Installation
Removal
NOTE:
When it is necessary to remove both right and left parking brake cables, repeat the following steps 4) to 5) on right and left wheels.
1) Hoist vehicle and remove rear wheel.
2) Remove console box.
3) Disconnect parking brake cable from equalizer (parking brake lever) and clamps.
4) Disconnect parking brake cable from brake shoe lever.
5) Remove parking brake cable and parking cable bracket.
Installation
Install it by reversing removal procedure, noting the following points.
^
Install clamps properly.
^
Tighten bolts and nuts to specified torque.
^
Adjust parking brake cable.
^
Check rear brake for dragging and brake system for proper performance. Brake test should be performed.