Grand Vitara 4WD L4-2.4L (2009)
Parking Brake Lever: Service and Repair
Parking Brake Lever Removal and Installation
CAUTION:
For ESP@ model, the yaw rate G sensor is set alongside the parking brake lever. When removing and installing the parking brake lever,
do not use an impact wrench or the like. Otherwise, the yaw late G sensor may be damaged by shock of impact wrench.
Removal
1) Block vehicle wheels and release parking brake lever.
2) Remove console box.
3) Disconnect lead wire of parking brake switch at coupler.
4) Remove parking brake cable adjusting nut (1).
5) Remove parking brake lever bolts (4) and then remove parking brake lever assembly (1) from equalizer (3).
6) Remove equalizer (3) from parking brake cable (2).
NOTE:
Don't disassemble parking brake lever switch. It must be removed and installed as a complete switch assembly.