Grand Vitara JLS 2WD V6-2.5L (2001)
Alignment: Description and Operation
ALIGNMENT SERVICE DATA (WITHOUT LOAD)
Front alignment refers to the angular relationship between the front wheels, the front suspension attaching parts and the ground. Generally, the only
adjustment required for front alignment is toe setting. Camber and caster can't be adjusted. Therefore, should camber or caster be out of specification
due to the damage caused by hazardous road conditions or collision, whether the damage is in body or in suspension should be determined. If the body
is damaged, it should be repaired and if suspension is damaged, it should replaced.
Toe-in (Toe-in gauge measurement) "B"-"A" 0 ± 2 mm (0 ± 0.08 inch)
Camber angle "C": 0'± 1
Caster: 2° 40'± 1
TOE SETTING:
Toe is the turning in or out of the front wheels. The purpose of a toe specification is to ensure parallel rolling of the front wheels (Excessive toe-in or
toe-out may increase tire wear).
Amount of toe can be obtained by subtracting "A" front "B" and therefore is given in mm (inch).
CAMBER:
Camber is the tilting of the front wheels from the vertical, as viewed from the front of the vehicle. When the wheels tilt outward at the top, the camber
is positive. When the wheels tilt inward at the top, the camber is negative. The amount of tilt is measured in degrees.
