Grand Vitara JLS Plus 2WD V6-2.5L (2000)
SENSOR INSPECTION
^
Check sensor (pole piece) for damage or bent.
^
Check sensor for resistance.
Resistance between terminals 0.8 - 1.6 k Ohms at 20°C, 68°F
Resistance between terminal and sensor body: 1 M Ohm or more
If any faulty is found, replace.
SENSOR ROTOR INSPECTION
^
Check rotor serration (teeth) for being missing, damaged or deformed.
^
Turn wheel and check if rotor rotation is free from eccentricity and looseness.
^
Check that no foreign material is attached.
If any faulty is found, repair or replace.
INSTALLATION
1. Check that no foreign material is attached to sensor and rotor.
2. Install it by reversing removal procedure.