Grand Vitara LTD 2WD V6-2.5L (2001)
TYPE 2
Type 1
OUTPUT VOLTAGE INSPECTION
Check in the same procedure as that used of front wheel speed sensor check.
Output AC voltage at 2/3 to one rotation per second (25 -38 Hz) (Rear wheel speed sensor): 100 mV or more
Reference
When using oscilloscope for this check, check if peak-to-peak voltage meets specification and waveform is complete.
Peak-to-peak voltage at 2/3 to one rotation per second (25 - 38 Hz) (Rear wheel speed sensor): 150 mV or more
REMOVAL
1. Disconnect negative (-) cable from battery.
2. Hoist vehicle.
3. Disconnect rear wheel speed sensor connector (2) and detach its harness (1) from vehicle body and rear axle.