Grand Vitara LTD 2WD V6-2.5L (2001)
"A" : Grease 99000-25030
CAUTION: In assembly, be sure to use new circlips, spider (1) and bearings (2). Reuse of circlips, spider (1) and bearings (2) once assembled is
prohibited.
1. Insert bearing race (2) into yoke (3), tapping it with a copper hammer (1), until it is flush with yoke (3) face. When doing this, insert spider (4) into
bearing race (2) to prevent rollers in bearing race (2) from coming out.
2. Insert the other bearing race on the opposite side into yoke, tapping with a hammer until it is flush with yoke face.
3. Insert bearing races on the flange yoke side in the same way as described in 1 and 2.
4. Place a metal plate on bearing races when tapping them into avoid damaging yoke.
5. Securely fit 4 circlips to shaft and flange yoke.
NOTE:
^
After assembly, check to ensure that both shaft yoke and flange yoke move smoothly.
^
Make sure that each circlip is fitted in groove securely.
INSTALLATION