Kizashi AWD L4-2.4L (2010)
-
Enable air bag system.
Driver Air Bag (Inflator) Module Removal and Installation
Driver Air Bag (inflator) Module Removal And Installation
WARNING:
-
When handling an air bag (inflator) module, be sure to read Precautions for Handling and Storage of Air Bag System Components and
observe each instruction. Failure to follow them could cause damage to air bag (inflator) module or result in personal injury.
-
Never insert foreign matter such as flat-end screwdriver between air bag (inflator) module and "S121" connector as static electricity may
cause accidental deployment.
NOTE: Refer to Repair and Inspection Required after Accident before replacing deployed air bag.
Removal
1. Disable air bag system.
2. Remove mounting bolts (2) of driver air bag (inflator) module at both sides of steering wheel (1) using torx wrench (T30).
