Samurai 2WD L4-1324cc 1.3L SOHC 5 Carb 8V (1987)
Brake Pad: Service and Repair
Fig. 4 Exploded view of brake assembly
1.
Raise and support vehicle, then remove wheel assembly.
2.
Remove caliper antirattle clip, Fig. 4.
3.
Remove caliper guide pin caps.
4.
Using a 6 mm Allen wrench, remove caliper guide pins.
5.
Remove pad protectors, then caliper cylinder.
6.
Remove pads.
7.
Reverse procedure to install noting the following:
a. Torque caliper bolts to 18.5-21.5 ft. lbs.
b. Install wheel assemblies.
c. Lower vehicle and perform brake test.