Samurai 4WD L4-1324cc 1.3L SOHC 5 Carb 8V (1986)
Convertible Top: Technical Service Bulletins
Convertible Top - Production Modification Info.
Date:
05/29/87
ST-021-7
SUBJECT:
CONVERTIBLE TOP MODIFICATION
The convertible top has been modified to improve its appearance and ease of removal and installation. Tension Bands and Bow Location Snaps have
been added to the rear window area. The modification has been made to both standard and deluxe models starting with VIN JS3JC51C-H4164410 or
JS4JC51C-H4164300.
The modified top will fit all 1986 and 1987 Samurais, however, vehicles having VIN's before those referenced above, must have a fitting set and new top
bow installed before the modified top can be attached properly. The parts needed for the conversion are as follows:
1.
Fitting Set, Canvas 78400-83810
2 - Bracket, Tension Band
2 - Band, Top Bow
5 - Male Snap, Top Bow Rear
2 - Nut, Tension Band Bracket
2.
Frame, Top Bow 78470-80001
These parts are currently available from the Parts Department (Refer to Parts Bulletin 87-12-4).
Modified Top Installation Procedures (When Fitting is Used)
1.
Remove the old convertible top.
2.
Remove top bow assembly.
3.
Install the five (5) male snaps on the new top bow in the holes provided (see Illustration A).
4.
Install the new top bow assembly on the vehicle.