Sidekick 4WD L4-1590cc 16L SOHC 8V (1990) Drum Brake Wheel Cylinder Service
Wheel Cylinder: Service and Repair
1.
Remove drum as outlined under BRAKE DRUM.
2.
Remove brake shoes as outlined under BRAKE SHOE.
3.
Loosen brake pipe flare nut. Fluid should not leak out of pipe or cylinder.
4.
Remove wheel cylinder mounting bolts, then disconnect brake pipe from wheel cylinder.
5.
Reverse procedure to install, noting the following:
a. Apply water tight sealant to wheel cylinder to backing plate mating surface.
b. Torque wheel cylinder mounting bolts and brake pipe flare nut to specifications.
c. Bleed brake system.
