Swift L4-1298cc 1.3L SOHC MFI (1997)
2. Loosen steering shaft upper joint bolt (but it must not be removed).
3. Remove lower joint bolt and separate pinion and lower joint.
4. Jack up vehicle and remove both right and left wheels.
5. Remove split pin and then remove tie rod castle nut from steering knuckle.
6. Using special tool, remove tie rod end from knuckle.
Special Tool (A): 09913-65210 or equivalent.
7. Remove exhaust pipe.
8. For Automatic transmission model: Remove engine rear torque rod with torque rod bracket.
For Manual transmission model: Disconnect gear shift control shaft and extension rod from transmission.