Swift L4-1298cc 1.3L SOHC MFI (1997)
17.
Connect the park lock cable (3) and install cable bracket bolt (1), adjust the cable as necessary. Tighten the cable bracket bolt (1) to 11 N-m (8
ft.lbs). See figure 1.
18.
Remove the red cam alignment pin only after assembly and adjustment of the park lock cable.
19.
Connect the shift selector electrical connector.
Important:
While assembling the shift indicator plate to the shift selector assembly in the next step, remember to connect the indicator light.
20.
Connect the shift indicator plate to the shift selector assembly and firmly snap into place.
21.
Install the center console cover and the six console screws. Tighten screws until fully driven and seated being careful not to strip them.
22.
Open the hood and clean an unused portion near the top center of the hood lock member to remove any oil, grease, or dirt residue. See figure 3.
23.
Affix the S7 campaign sticker to the clean dry surface.