Swift GL L4-1298cc 1.3L SOHC MFI (2000)
5. Install rotor to shaft, directing "dent" marked side of rotor toward pump cover (facing up).
6. Install snap ring to shaft, then make sure to fit snap ring into shaft groove securely.
7. Apply power steering fluid to sliding surface of cam ring.
8. Install cam ring to pump body, directing "5" marked side of cam ring toward side plate (facing down).
9. Apply power steering fluid to each vane.
10. Install vanes (10 pieces) to rotor with its R part faced outward as shown.
11. Apply power steering fluid to O-ring and fit it to pump body.
12. Install O-ring to pump body.
13. Apply power steering fluid to sliding surface of pump cover and rotor.
