SX4 2WD L4-2.0L (2007)
4. Remove ABS (ESP(R)) hydraulic unit / control module with bracket from vehicle by removing two bracket bolts.
5. Remove bolt and pull out ABS (ESP(R)) hydraulic unit / control module assembly (1) from bracket (3) using flat end rod or the like (2).
Caution:
^
Do not give an impact to hydraulic unit.
^
Use care not to allow dust to enter hydraulic unit.
^
Do not place hydraulic unit on its side or upside down. Handling it in inappropriate way will affect its original performance.
