SX4 2WD L4-2.0L (2007)
Tightening torque
Passenger air bag (inflator) module attaching bolt a: 23 Nm (2.3 kgf-m, 17.0 ft. lbs.)
4. Install glove box.
5. Install center ventilation louver with garnish referring to Center Ventilation Louver Removal and Installation.
6. Enable air bag system. Refer to Enabling Air Bag System:Except advanced Air Bag.
Advanced Air Bag
Passenger Air Bag (Inflator) Module Removal And Installation
WARNING:
^
Never attempt to disassemble or repair the passenger air bag (inflator) module. If any abnormality is found, be sure to replace it with new
one as an assembly.
^
Be sure to read Precautions on Service and Diagnosis of Air Bag System:Advanced Air Bag, Precautions on Handling and Storage of Air
Bag System Components:Advanced Air Bag and Precautions on Disposal of Air Bag and Seat Belt Pretensioner:Advanced Air Bag before
starting to work and observe every precaution during work. Neglecting them may result in personal injury or undeployment of the air
bag when necessary.