SX4 2WD L4-2.0L (2007)
Removal
1. Disable air bag system. Refer to Disabling Air Bag System:Advanced Air Bag.
2. Remove center ventilation louver with garnish referring to Center Ventilation Louver Removal and Installation.
3. Pull out glove box while pushing its stopper from both right and left sides.
4. Remove passenger air bag (inflator) module attaching bolts (1) and air bag hole cover bolts (6).
5. Hold up passenger air bag (inflator) module with air bag hole cover (5) without extending wire harness (2) to avoid air bag connector damage and
to disconnect passenger air bag (inflator) module connector (3) as shown in figure.
a. Unlock lock button (4)
b. With lock button unlocked, disconnect connector.
6. Remove passenger air bag (inflator) module with air bag hole cover (5) from instrument panel.
7. Remove passenger air bag (inflator) module (1) from air bag hole cover (2).