SX4 2WD L4-2.0L (2007)
Installation
Reference: Forward Impact-Sensor Inspection:Except advanced Air Bag
CAUTION: Proper operation of forward impact-sensor requires sensor be rigidly attached to vehicle structure and that the arrow on sensor
be pointing toward the front of the vehicle.
1. Check that none of the following faulty conditions exists.
^
Bend, deformity or rust of front panel.
^
Foreign matter on mating surface of sensor.
2. Install forward impact-sensor (1) to driver side apron side member (3) and tighten mounting bolt (2) to specified torque.
Tightening torque
Forward impact-sensor mounting bolt a: 9 Nm (0.9 kgf-m, 6.5 ft. lbs.)
3. Connect forward impact-sensor connector (4) by pushing connector till click is heard from it.
