SX4 2WD L4-2.0L (2007)
4. Install front bumper referring to Front Bumper and Rear Bumper Components.
5. Enable air bag system referring to Enabling Air Bag System:Except advanced Air Bag.
6. Connect negative (-) cable at battery.
Advanced Air Bag
Forward Impact-Sensor Removal And Installation
WARNING: During service procedures, be very careful when handling a sensor.
^
Never strike or jar a sensor.
^
A sensor and mounting bracket bolts must be carefully torqued to assure proper operation. Under loose connection, it could cause
improper operation of the air bag system.
Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system referring to Disabling Air Bag System:Advanced Air Bag.
3. Disconnect forward impact-sensor connector (1) sliding connector outer (2) as shown.
4. Remove forward impact-sensor bolts (3) and forward impact-sensor (4) from apron side member (5).