SX4 4WD L4-2.0L (2008)
Valve Cover: Service and Repair
Cylinder Head Cover Removal and Installation
Removal
1. Disconnect negative (-) cable at battery.
2. Remove ignition coils.
3. Remove oil level gauge (1).
4. Disconnect CMP sensor connector (2) and then remove CMP sensor (7) from cylinder head cover.
5. Disconnect breather hose (3) and PCV hose (4) from cylinder head cover (5).
6. Remove harness bracket (6) from cylinder head cover (5).
7. Remove PCV valve from cylinder head cover.
8. Remove cylinder head cover nuts in such order as indicated in the figure.
