SX4 4WD L4-2.0L (2008)
9. Remove cylinder head cover from cylinder head.
10. Remove cylinder head side seals from cylinder head.
Installation
1. Install PCV valve to cylinder head cover.
2. Remove oil, old sealant and dust from sealing surfaces on cylinder head and cover.
3. Install new cylinder head side seals (1) to cylinder head.
4. Apply sealant "A" to cylinder head sealing surface area as shown in figure.
"A": Water tight sealant 99000-31250SUZUKI Bond No.1207F
5. Apply engine oil to new O-rings.
6. Install new O-rings. (3) and new cylinder head cover gasket (2) to cylinder head cover (1).
