SX4 4WD L4-2.0L (2008)
Control Module: Service and Repair
Transmission Control Module (TCM) Removal and Installation
CAUTION: TCM consists of highly precise parts, therefore when handling it, be careful not to expose to excessive shock.
Removal
1. Disconnect negative cable at battery.
2. If the vehicle is equipped with air bag system, disable air bag system.
3. Remove glove box.
4. Disconnect connectors from TCM (1).
5. Remove TCM by removing its nuts.
Installation
Reverse removal procedure noting the following.
^
Connect TCM connectors securely.
^
If the vehicle is equipped with air bag system, be sure to enable air bag system after TCM is back in place.
