suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Front Wiper and Washer Switch (In Combination Switch)|Page 4269 > < Wiper Relay|Testing and Inspection|Page 4263
Page 1
background image

Windshield Washer Switch: Testing and Inspection
Front Wiper and Washer Switch (In Combination Switch)

1. Disconnect negative cable (-) at battery.
2. Disconnect combination switch lead wire coupler.
3. Use a circuit tester to check the continuity at each switch position. If any continuity is not obtained, replace switch.

Front Wiper and Washer Switch (In Combination Switch)|Page 4269 > < Wiper Relay|Testing and Inspection|Page 4263