XL-7 2WD V6-3.6L (2007)
2. Slide the inner cable forward (1) and install on the park brake actuator.
3. Position the spring (2) against the mounting bracket.
4. Install the rear tire and wheel assembly.
5. Insert the cable (2) through the opening in the vehicle underbody.
6. Install the park brake cable retaining bracket to the rear suspension lower trailing arm.
CAUTION: Refer to [Fastener Notice].
7. Install the bolt (1) to the park brake cable retainer and lower trailing arm.
Tightening torque
Tighten the bolt and nut to 12 Nm (106 in. lbs.).
