XL-7 2WD V6-3.6L (2007)
CAUTION:
Refer to [Fastener Notice].
6. Tighten the oil pan bolts in sequence shown.
Tightening torque
1. Tighten the 8 mm bolts (1-11) to 23 Nm (17 lb ft).
2. Tighten the 6 mm bolts (12, 13) to 10 Nm (89 lb in).
7. Install the air conditioning (A/C) compressor.
8. Install the catalytic converter.
9. Lower the vehicle.
10. Refill the engine oil.
11. Install the right side engine mount.
12. Remove the engine support fixture.
13. Connect the battery negative cable.