XL-7 2WD V6-3.6L (2007)
6. Remove the oil suction tube seal from the oil suction tube. Discard the oil suction tube seal.
Oil Pan Cleaning and Inspection
Special Tool
^
J 28410 Gasket Remover
Cleaning Procedure
1. Remove any old thread sealant, gasket material or sealant using J 28410.
2. Clean the oil pan and oil pan components in solvent.
3. Clean out debris from the bolt holes.
WARNING: Refer to [Safety Glasses Caution].
4. Dry the oil pan and oil pan components with compressed air.
Inspection Procedure
1. Inspect the exterior of the oil pan for the following conditions:
^
Damage to the drain plug hole threads (1)
^
Dents, cracks or damage to the exterior (2)
^
Damage to the oil pan mounting holes (3)
^
Damage to the transmission mounting bolt hole threads (4)
^
Damage to the bracket bolt hole threads (5).