XL-7 2WD V6-3.6L (2007)
Timing Cover: Removal and Replacement
Engine Front Cover Replacement
Special Tool
EN 46105 Camshaft Locking Tool
EN 46111 Crankshaft Rotational Socket
EN 46109 Guide Pin Set
Removal Procedure
1. Remove the lower intake manifold.
2. Remove the camshaft covers.
3. Drain the engine coolant.
4. Remove the water outlet housing assembly.
5. Remove the drive belt tensioner.
6. Remove the water pump.
7. Remove the power steering pump.
8. Remove the crankshaft balancer.
9. Remove the camshaft position actuator valves from the front cover.
10. Remove the camshaft position actuator solenoid valves from the front cover.
11. Remove the generator.
