XL-7 2WD V6-3.6L (2007)
^
Damage to the camshaft position actuator valve oil seal bores (1)
^
Damage to the engine front cover bolt holes (2)
^
Damage and/or corrosion to the engine coolant passage (3)
^
Dents or damage to the exterior (4)
^
Damage to the crankshaft front oil seal bore (5)
^
Gouges or damage to the water pump sealing surfaces (6)
^
Damage to the water pump bolt hole threads (7)
2. Inspect the interior of the engine front cover for the following conditions:
^
Damage to the engine front cover bolt holes (1)
^
Gouges or damage to the engine front cover sealing surfaces to the engine block (7), oil pan (5), and/or camshaft covers (2)
^
Gouges or damage to the water pump seal area (3)
^
Loose or damaged deadener plates (4)
^
Damage and/or corrosion to the engine coolant passage (6)
^
Damage to the crankshaft front oil seal bore
^
Gouges or damage to the O-ring sealing areas
3. Repair or replace the engine front cover as necessary.