XL-7 2WD V6-3.6L (2007)
Timing Cover: Testing and Inspection
Engine Front Cover Cleaning and Inspection
Special Tool
J 28410 Gasket Remover
Cleaning Procedure
1. Remove any RTV sealant (1) from the engine front cover using J 28410.
2. Clean out debris from the bolt holes.
3. Clean the engine front cover in solvent.
WARNING: Refer to Safety Glasses Caution]
4. Dry the engine front cover with compressed air.
Inspection Procedure
1. Inspect the exterior of the engine front cover for the following conditions:
