XL-7 2WD V6-3.6L (2007)
CAUTION:
Refer to [Fastener Notice].
7. Tighten the engine front cover bolts in the sequence shown.
Tightening torque
Tighten the engine front cover bolts in sequence to 23 Nm (17 lb ft).
8. Install the generator.
9. Install the camshaft position actuator solenoid valves from the front cover.
10. Install the camshaft position actuator valves from the front cover.
11. Install the crankshaft balancer.
12. Install the power steering pump.
13. Install the water pump.
14. Install the water outlet housing assembly.
15. Install the drive belt tensioner.
16. Install the camshaft covers.
17. Install the lower intake manifold.
18. Refill the engine coolant.