XL-7 2WD V6-3.6L (2007)
3. Remove the water pump seal from the engine front cover.
4. Discard the water pump seal.
Engine Front Cover Assemble
Engine Front Cover Assemble
Special Tool
EN 46103 Camshaft Actuator Valve Seal Remover/Installer
J 29184 Output Shaft Seal Installer
NOTE: Do not lubricate the crankshaft front oil seal or crankshaft balancer sealing surfaces. The crankshaft balancer is installed into a dry seal.
1. Install the NEW crankshaft front oil seal into the engine front cover using the J 29184.