XL-7 2WD V6-3.6L (2007)
Removal Procedure
1. Remove the instrument panel (I/P) upper trim panel. Refer to [Instrument Panel Upper Trim Panel Replacement].
2. Remove the RH defogger duct screws from the I/P upper trim panel.
3. Remove the RH defogger duct from the I/P upper trim panel.
Installation Procedure
1. Inspect the seals, and replace if damaged, using Kent Industries adhesive backed foam tape P/N 46485 or equivalent.
2. Install the RH defogger duct to the I/P upper trim panel.
CAUTION: Refer to [Fastener Notice] in Cautions and Notices.
3. Install the RH defogger duct screws to the I/P upper trim panel.
Tightening torque
Tighten the screws to 1 N.m (9 lb.in).
4. Install the instrument panel (I/P) upper trim panel. Refer to [Instrument Panel Upper Trim Panel Replacement].
Windshield Defroster Duct Replacement
Windshield Defroster Duct Replacement
